Contact

  • For information on documents not included in these lists, please contact the NATO Standardization Agency at nsa@nsa.nato.int
Eng. / Fr.

Standardization Agreements /
Accords de normalisation

NATO Standardization Agreements for procedures and systems and equipment components, known as STANAGs, are developed and promulgated by the NATO Standardization Agency in conjunction with the Conference of National Armaments Directors and other authorities concerned.

STANAG - AACP - AAP - AASTP - AECTP - AEDP - AJP -
AOP
- AQAP - ARMP - ATP - ADatP

Standardization Agreements/ Accords de normalisation
STANAG 2138
Edition 4 - May 1996
Troop trial Principles and Procedures - Combat Clothing and Personal Equipment / Principes et procédures d'essais en campagne - Vêtements de combat et équipement individuel
STANAG 2345 Edition34 - 13 February 2003
Evaluation and control of personnel exposure to radio frequency fields - 3kHz to 300 GHz
Evaluation et contrôle de l'exposition du personnel aux rayonnements des fréquences radio allant de 3kHZ 300 GHz
STANAG 4107
Edition 8 - July 2007
Mutual Acceptance of Government Quality Assurance and Usage of the Allied Quality Assurance Publications
STANAG 4174 Edition 3 - 14 August 2008
Allied Reliability and Maintainability Publications
STANAG 4184 
Edition 3 - 27 November 1998
Microwave Landing System (MLS)
STANAG 4545 
Edition 1, Amendment 1 - 14 April 2000
NATO Secondary Imagery Format / Format d'imagerie secondaire OTAN (NSIF)
STANAG 4559
Edition 2 - 15 June 2007
NATO Standard Image Library Interface
STANAG 4565
Edition 1 - 26 September 2003
Airborne Multi-Mode Receiver for Precision Approach and Landing
STANAG 4575  Edition 2 - 8 March 2005
NATO Advanced Data Storage Interface (NADSI)
STANAG 4607 Editorial Edition 2- 02 August 2007
NATO Ground Moving Target Indicator Format (GMTIF)
STANAG 4609 Edition 2 - 15 June 2007
NATO Digital Motion Imagery Standard
STANAG 7023 
Edition 3 - 16 September 2004
NATO Primary Image Format (NPIF)
STANAG 7024 Edition 2 - 2 August 2001
Imagery Air Reconnaissance Tape Recorder Standard
STANAG 7141 Edition 5 - 26 February 2008
Joint NATO Doctrine for environmental protection during NATO led military activities
STANAG 7186 Edition 1 - 2 May 2007
NATO Glossary of standardization terms and definitions (English and French) - AAP-42

 

Allied Acquisition Practices Publications (AACP)
AACP-1 AACP-1 sets out guidelines to facilitate the development of effective arrangements for armaments co-operative programmes. Part I, and its supplements, provide guidance for the drafting of co-operative programme Memoranda of Understanding (MoUs), whereas Part II advises on ways to enhance collaboration between governments and industry at early stages of a programme.
AACP-2 The manual sets out a complete set of guidelines for the contracting process of the entire programme life-cycle, from the feasibility phase through to and including the production phase and -once completed- the logistics support phase, for use sequentially in co-operative programmes.

 

Allied Administrative Publications (AAP)
AAP-6 NATO Glossary of Terms and Definitions / Glossaire OTAN de termes et définitions.
This “electronic” version of AAP-6(2007) contains all the newly NATO Agreed terms and definitions approved up to April 2008
AAP-15 (2008) - June/ juin 2008
NATO Glossary of Abbreviations used in NATO Documents and Publications / Glossaire OTAN des abréviations utilisées dans les documents et publications OTAN
AAP-42 (2007) - May/mai 2007
NATO Glossary of Standardization Terms and Definitions (English and French), lists the terminology used in the field of standardization
Glossaire OTAN de termes et définitions relatifs à la normalisation (français et anglais), répertorie les termes utilisés dans la domaine de la normalisation.

 

Allied Ammunition Storage and Transport Publications (AASTP)
AASTP-1 Edition 1, Change 2 - May 2006 - Manual of NATO Safety Principles for the Storage of Military Ammunition and Explosives.
AASTP-1 Edition 1, Révision 2 - Manuel sur les principes de sécurité OTAN applicables au stockage des munitions et des explosifs militaires"
AASTP-2 Edition 1, Change 3 - September 2005 - Manual of NATO Safety Principles for the Transport of Military Ammunition and Explosives
AASTP-2 Edition 1, Révision 3 - Manuel OTAN sur les principes de sécurité applicables au transport des munitions et explosifs militaires

 

Allied Environmental Conditions and Test Publications (AECTP)
AECTP 100 Edition 3 - January 2006
Environmental Guidelines for Defence Materiel
AECTP 200 Edition 3 - January 2006
AECTP 300 Edition 3 - January 2006
Climatic Environmental Tests
AECTP 400 Edition 3 - January 2006
Mechanical Environmental Tests
AECTP 500 Edition 2 - January 2006
Electrical/Electromagnetic Environmental Tests
AECTP 600 Edition 2 - April 2007
The ten step method for evaluating the ability of materiel to meet extended life requirements and role and deployment changes

 

Allied Engineering Documentation Publication (AEDP)
AEDP-2 Edition 1 - September 2005
NATO Intelligence Surveillance Reconnaissance Architecture (NIIA)
AEDP - 4

Edition 1 - June 2007
NATO Secondary Imagery Format (STANAG 4545) Implementation Guide

AEDP-5 Edition 1 - April 2008
NATO Standard Imagery Library Interface
(STANAG 4559) Implementation Guide
AEDP-6 Edition 1 - March 2006
AEDP-7 Edition 1 - April 2008
NATO Ground Moving Target Indicator Format (STANAG 4607) Implementation Guide
AEDP-8 Edition 2 - June 2007
NATO Digital Motion Imagery Format (STANAG 4609) Implementation Guide
AEDP-9  Edition 1- March 2006
NATO Primary Image Format (STANAG 7023) Implementation Guide
AEDP-11  Edition 1 - May 2006
Imagery Air Reconnaissance Tape Recorder Standard (STANAG 7024) Implementation Guide

 

Allied Joint Publications (AJP)
AJP-4(A) Allied Joint Logistics Doctrine - December 2003
AJP-4.4(A) Allied Joint Movement and Transportation Doctrine - December 2005
AJP-4.5(A) Allied Joint Host Nation Support Doctrine & Procedures - May 2005

 

Allied Ordnance Publications (AOP)
AOP 38 Edition 4 - December 2006 - Specialist Glossary of Terms and Definitions on Ammunition Safety/Glossaire spécial de termes et définitions sur la sécurité des munitions.

 

Allied Quality Assurance Publications (AQAP)
AQAP-160 Edition 1 - September 2001
NATO integrated quality requirements for software throughout the life cycle
[Eng.]
AQAP-169 Edition 1 - September 2001
NATO Guidance on the use of AQAP-160 Edition 1
[Eng.]
AQAP-2000 Edition 2 - September 2007
NATO policy on an integrated systems approach to quality through the life cycle
[Eng./Fr.]
AQAP-2009 Edition 2 - November 2006
NATO guidance on the use of the AQAP 2000 series
[Eng./Fr.]
AQAP-2050 Edition 1 - September 2003
NATO Project Assessment model
[Eng./Fr.]
AQAP-2070 Edition 1 - January 2004
NATO Mutual Government Quality Assurance (GQA) Process
[Eng./Fr.]
  • NATO Request for Government Quality Assurance (RGQA) and Risk Information Feedback Form (Edition 1 - January 2004)
[Eng./Fr.]
AQAP-2105 Edition 1 - December 2005
NATO requirements for deliverable quality plans
[Eng./Fr.]
AQAP-2110 Edition 2 - November 2006
NATO quality assurance requirements for design, development and production
[Eng./Fr.]
AQAP-2120 Edition 2 - November 2006
NATO quality assurance requirements for production
[Eng./Fr.]
AQAP-2130 Edition 2 - November 2006
NATO quality assurance requirements for inspection and test
[Eng./Fr.]
AQAP-2131 Edition 2 - November 2006
NATO quality assurance requirements for final inspection
[Eng./Fr.]
AQAP-2210 Edition 1 - November 2006
NATO Supplementary Software Quality Assurance Requirement
[Eng./Fr.]
.
Allied Reliability and Maintainability Publication (ARMP)
ARMP-1 Edition 4 - August 2008
NATO Requirements for Reliability and Maintainability
[Eng./Fr.]
ARMP-4 Edition 4 - August 2008
Guidance for witing NATO R & M (Reliability and Maintainability) Requirements Documents
[Eng./Fr.]
ARMP-6 Edition 3 - August 2008
Guidance for Managing In-service R&M (Reliability and Maintainability)
[Eng./Fr.]
ARMP-7 Edition 2 - August 2008
NATO R&M terminology applicable to ARMPs
[Eng./Fr.]

 

Allied Tactical Publications (ATP)
ATP-2(B) Vol II December 2006
ATP-2(B) Vol II is a publication which provides information to Ship Owners, Operators, Masters and Officers regarding the interaction between Naval forces and commercial shipping. In particular the publication serves as a handbook for the world -wide application of NCAGS principles and procedures that exist to enhance the safety of shipping in times of tension, crisis and conflict.
Allied Data Procedure (ADatP)
ADatP-34 NATO C3 Technical Architecture (NC3TA) The NATO Policy document for the architectural development of System and Technical Views. The NC3TA is defined as: "The minimal set of rules governing the specification, interaction, and interdependence of the parts or elements of NC3 Systems whose purpose is to ensure interoperability by conforming to the technical requirements of all NC3TA Volumes. The NC3TA identifies the services, building blocks, interfaces, standards, profiles and related products and provides the technical guidelines for implementation of NC3 Systems". Webmodule